The inner liner of this Cobalt ring is made from a genuine used Bourbon Whiskey white oak barrel. Almost as much work goes into perfecting the barrel as does perfecting the iconic American whiskey. Carefully selected American White Oak is slowly dried outdoors for nearly a year. After being exposed to the rain and sun, it is kiln dried, assembled, and then charred to release the naturally occurring flavors that will be imparted to the whiskey. Though the blanks reek of whiskey, the final products (sadly, from an authenticity perspective) have no odor, having been sealed with finish. The cut on the exterior makes my life difficult. But it also allows for a bit of the wood to peek out on the exterior of the ring!

I have manyother whiskey barrel wood options besides Jack Daniels®, including Jim Beam, Maker's Mark, Stranahan's, Four Roses, and Buffalo Trace. Scotch options include Balvenie, Macallan and more.

The outer portion of this ring is made of Cobalt - the most scratch resistant and shatterproof material I offer. Like titanium, it is hypoallergenic and biocompatible. However, in many circumstances under which your Titanium ring might scratch, Cobalt will not. It is an alloy that is identical to Platinum in color, but it is an order of magnitude stronger. Cobalt offers nearly the scratch resistance of Tungsten Carbide, but unlike Tungsten, Cobalt will not shatter if dropped. 

The ring pictured is a flat profile and polished. This is the only possible configuration.


Sizing

I highly recommend going to a jewelry counter to determine your size, even if you believe you already know your size. "Do it yourself" ring sizing methods (string, etc.) should absolutely not be trusted. Be sure to be measured using the width you plan to order.

NOTE ON WIDTH:

The minimum width for this style is 5mm. The maximum is 8mm.

Recommended width is calculated in this way: Size 5 is 5mm wide. Width increases .5mm per size above that. So:

Size 5- 5mm
Size 6- 5.5mm
Size 7- 6mm
Size 8- 6.5mm
Size 9- 7mm
Size 10- 7.5mm
Size 11+ - 8mm


************************************ IMPORTANT INFO ****************************************

****************************************************************************************************
****PLEASE PLEASE PLEASE BE 100% SURE OF YOUR SIZE BEFORE ORDERING *****
****************************************************************************************************

Cobalt lined wood rings can be adjusted up or down about 1/4 size (by removing or adding finish to the interior). Every ring is made to the exact size provided. An error in sizing that exceeds the margin provided above will necessitate a completely new ring. REFUNDS AND EXCHANGES WILL NOT BE POSSIBLE. BE 100% SURE OF YOUR ACCURATE AND CORRECT SIZE BEFORE ORDERING.

Please click on the "Policies" link (under Shop Info) to see wood ring care instructions and FAQ.

Each ring is given multiple coats of a hybrid epoxy finish, which is completely water-proof and soap proof. This protective coating is sanded up to 12,000 grit for an unbelievable, glass-like finish.

Shipping

All rings will ship via USPS Priority. Learn more about my shipping policy and international shipping.