Black Zirconium Wood Ring Lined with Black Cherry Burl

Black Zirconium Wood Ring Lined with Black Cherry Burl

395.00

Intricate Midwest Cherry wood decorates the inside of this Black Zirconium ring.

Current ship date for this Black Zirconium Wood Ring Lined with Black Cherry Burl is 5-6 weeks.

Quantity:
Add To Cart

This is the extremely common (here in the midwestern US, anyway) black cherry wood. Here, we often use it as firewood or to smoke meat. The burl, however, is highly sought after for obvious reasons. The stock I use is extremely high figure and colorful.

The metal in this listing is Black Zirconium-- Zirconium that is heat treated until it attains a very hard, durable black coating. The naturally silver colored metal is placed in a kiln at very high temperatures until the extreme heat causes oxidization. Just for full disclosure - the metal ring really is a very dark grey.The ring pictured is a polished finish, but a satin finish is also available. The ring is also a flat profile (vs. a domed profile), which can also be changed. Just add the details you like in the "message to seller" section at checkout. Unfortunately, engraving is NOT possible with this ring.

Sizing

I highly recommend going to a jewelry counter to determine your size, even if you already know your size. "Do it yourself" ring sizing methods (string, etc.) should absolutely not be trusted. Be sure to be measured using the width you plan to order.

NOTE ON WIDTH:
The minimum width for this style is 5mm. The maximum is 8mm.

Recommended width is calculated in this way: Size 5 is 5mm wide. Width increases .5mm per size above that. So:

Size 5- 5mm
Size 6- 5.5mm
Size 7- 6mm
Size 8- 6.5mm
Size 9- 7mm
Size 10- 7.5mm
Size 11+ - 8mm


************************************ IMPORTANT INFO ****************************************

****************************************************************************************************
****PLEASE PLEASE PLEASE BE 100% SURE OF YOUR SIZE BEFORE ORDERING *****
****************************************************************************************************

Zirconium lined wood rings can be adjusted up or down about 1/4 size (by removing or adding finish to the interior). Every ring is made to the exact size provided. An error in sizing that exceeds the margin provided above will necessitate a completely new ring. REFUNDS AND EXCHANGES WILL NOT BE POSSIBLE. BE 100% SURE OF YOUR ACCURATE AND CORRECT SIZE BEFORE ORDERING.

Each ring is given multiple coats of a hybrid epoxy finish, which is completely water-proof and soap proof. This protective coating is sanded up to 12,000 grit for an unbelievable, glass-like finish.

Shipping

All rings will ship via USPS Priority. Learn more about my shipping policy and international shipping.